Sintech NGFF M.2 nVME SSD Adapter Card for Upgrade 2013-2015 Year Macs(Not Fit Early 2013 MacBook Pro)

NOTICE:because too many customers can use it,I suggest you to check out it again if your MAC can’t detect nVME SSD. Pls notice to insert card fully into SSD slot and you should prepare bootable USB disk(see third point) with High Sierra to format M.2 SSD first, it can’t Give a boost to recuperate from internet. main steps are as following:
1. Be sure to move to High Sierra whilst still on your old drive, so that a newer firmware is installed that can take care of NVME.
2. Do a full backup to your TimeMachine. 3. Create a High Sierra Installer on a bootable USB stick.
4. Open the macbook and disconnect the battery whilst switching out the drive and make sure both adapter and new SSD sit snug. In any case reconnect the battery before closing the shell.
5. Insert the Installer USB stick from step 2, and press the option key whilst the machine starts. Once it’s up you’ll be able to now go to the disk utils to format

Notice: The card comes with blak film covering pins ,Sintech install guide paper-card,longer T5 screw and PE PAD,if you didn’t get these accessories ,pls report it to us.
Give a boost to Adata NVMe SSD : SX6000, SX7000, SX8200, SX8200 Pro etc,Corsair : MP500, MP510,Crucial : P1,HP: ex920, ex950
Give a boost to Intel NVMe SSD : 600p, 660p, 760p,Toshiba XG3-XG4-XG5-XG5p-XG6 line,Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro,WD:v1, v2 and v3,MyDigital: SBX – BPX
NOT Give a boost to: Samsung 970 Evo Plus,PM981,950 Pro
Notice:It can’t Give a boost to recovering from internet,important to prepare bootable USB disk driver(M.2 PCIe has no OS systerm inside,it should be erased first).There is hibernation for all 2013-2014 Macs,you’ll be able to set it to unravel this problem by typing “sudo pmset standby 1” as guider in attached photo.if you don’t know how to do this, you’ll be able to ask for help.