【Speed Up to 700mm/s】Speed up to 700mm/s and 40000 acceleration: SV08 is designed for faster printing, with a maximum printing speed of 700mm/s and 40000 acceleration. Maximum glide rate of the hot end: 30 mm³/s. It only takes 11 minutes and 30 seconds to print a boat. Smooth printing and good printing quality, with a better experience
【Larger Printing Size: 13.78×13.78×13.6 Inches】Sovol SV08 3D Printer achieves a larger printing size: 13.78×13.78×13.6 Inches, as you want, create bigger printings
【Core XY Flying Gantry Structure & One-button Automatic Leveling】Inheriting the core design of the Core XY flying gantry of Voron2.4, this is a more stable structure. And the hot bed may be fixed. Achieve more precise printing. Create more beautiful 3D works. The gantry structure realizes One-click “Z offset” selection to mechanically level the hot bed. No manual operation is required, saving time
【Integrated Hotend-design with 300° nozzle to Reduce Leakage】Integrated hotend-design: heating block, throat and nozzle are integrated. Effectively reduce the opportunity of nozzle leakage, and extend the service life of the nozzle. Hotend’s maximum glide rate|is 30 mm³/s, equipped with 300° all-metal nozzle Strengthen these filaments: PLA, TPU, PETG, ABS, ASA, PA, PC (Please note: when printing these filaments PETG, ABS, ASA, PA, PC,it wish to be used a heat preservation cover or sealing kit, glue)
【Can Be Fitted with Rugged Cover Plate Kit 】The Cover Plate Don’t come with SV08. Because the cover plate kit isolates noise effectively, the noise is very low after installing the cover kit
【Equipped with 3 Working Modes: USB Printing, WIFI (2.4G), and Network Port 】You’ll be able to copy the slicing software to a USB flash drive and connect it to SV08 for printing. You’ll be able to also print the usage of WIFI (2.4G) or wired network connection, which is very convenient
Reviews
There are no reviews yet.